Makers Gonna Learn Price Increase 2/1!
Grab your membership to lock in our current prices before 2023 price increase.
All members enrolled by 1/31 keep their price forever!

Your vinyl will come marked as to what type it is when you buy it, but once you have accumulated some scraps, you may have a hard time remembering which is which. We suggest that you write on the back of the scraps with a permanent marker so you always know which type of vinyl it is. For more detailed information on vinyl, check out this video.

Here are our best tips and tricks! https://makersgonnalearn.com/videos/the-best-tips-and-tricks-for-mastering-car-decals-with-cricut/

Check out this tutorial: https://makersgonnalearn.com/how-to-iron-on-a-hat/

Here you go: https://makersgonnalearn.com/how-to-use-holographic-vinyl/

When you see little bubbles forming as you heat your HTV, that is a good sign! It means it is adhering to your surface just as you want it to do.

This will vary from material to material. Your EasyPress comes with a chart that tells you the exact time and temperature for your surface material and the type of iron-on vinyl you’re using. For your convenience, we also have some handy EasyPress charts in our Cricut Reference Guide, free with your Makers Gonna Learn membership. Here is a comprehensive guide to Cricut EasyPress that you may find helpful: https://makersgonnalearn.com/comprehensive-guide-to-cricut-easypress/

You can find our comparison of the two here: https://makersgonnalearn.com/videos/heat-press-vs-easypress-which-one-do-i-need/

This will vary from material to material. Your EasyPress comes with a chart that tells you the exact time and temperature for your surface material and the type of iron-on vinyl you’re using. For your convenience, we also have some handy EasyPress charts in our Cricut Reference Guide, free with your Makers Gonna Learn membership. With a Cricut EasyPress Mini, you should see bubbles forming on your heated vinyl. This is a good sign! It means the vinyl is adhering to your surface and indicate when you can stop pressing it.

Always place your HTV shiny side down on your cutting mat.

To apply HTV, you must use heat to activate the adhesive. Here is a step-by-step tutorial: https://makersgonnalearn.com/how-to-use-iron-on-with-your-cricut-maker-and-easypress/